How to Resize Your Audemars Piguet Royal Oak Bracelet: A Step-by-Step Guide

If you're looking to adjust the fit of your Audemars Piguet Royal Oak watch bracelet, whether by adding or removing links, this guide will walk you through the process. Properly sizing your bracelet ensures both comfort and an aesthetically balanced fit. Follow these steps carefully to avoid damaging your watch.

Tools You’ll Need to Resize AP Royal Oak Bracelet

Before getting started, make sure you have the right tools:

• Watch Screwdriver Set – A 1.4mm to 1.6mm screwdriver is optimal for the bracelet screws.
• Tweezers (Optional) – Helps in managing small components like screws and pins.
• Jewelry Tray (Optional) – Keeps all parts organized and prevents losing tiny screws.
• Pin Pusher (Optional) – Useful for pushing out bracelet pins easily.

Step-by-Step Guide to Adjusting Your Royal Oak Bracelet

Step 1: Identify the Number of Links to Adjust

• First, determine how many links need to be added or removed.
• Next, measure your wrist or try on the watch to see how it fits.
• If you need to remove multiple links, distribute them evenly on both sides of the bracelet for a balanced fit. So, if you are taking out two links, remove one from each side of the bracelet.

Step 2: Locate the Adjustable Links

Not all links on the Royal Oak bracelet are adjustable. Look for links with visible screws—these are the ones you can modify.

Step 3: Remove the Screws and Pins

1. Select the link you want to adjust.
2. Using the correct screwdriver size, unscrew the screw on the designated link.
3. If the screw does not turn easily, double-check that you are using the right screwdriver size.
4. Once the screw is removed, use a pin pusher or lightly tap the bracelet to release the pin holding the link.

Removing the screw:

Removing the pin: once the screw is removed, use a pin pusher or lightly tap the bracelet to release the pin holding the link.

Step 4: Add or Remove Links

• If removing links, take out the desired number.
• If adding links, carefully align the new link in place before inserting the pin.

Step 5: Reassemble the Bracelet

1. Align the last link with the clasp.
2. Insert the pin back into the hole to reconnect the bracelet.
3. Secure the link by carefully screwing the screw back into place. Avoid overtightening, as it may damage the screw threads.

Step 6: Test the Fit

• Put the watch on and check the fit. It should be comfortable but not loose enough to slide along your wrist. Some prefer a tight fit, and some prefer the watch to have more give. 
• If it's too tight or loose, repeat the steps as needed and remove another link or re-add a link. 
• Some Royal Oak models offer half-links for finer adjustments.

Final Checks

• Ensure all screws are tightened properly to avoid any accidental loosening.
• Wear the watch for a short period to confirm comfort and fit.
  

Conclusion

Sizing your Audemars Piguet Royal Oak bracelet correctly ensures comfort and enhances the look of your watch. By following these steps and using the proper tools, you can safely adjust your bracelet at home.