How to Resize a Rolex Oyster Bracelet (Step-by-Step Guide)

Need to resize your Rolex Oyster bracelet at home? Follow this step-by-step guide to resize your Oyster bracelet safely and effectively. 

Tools You’ll Need

• Watch holder – To keep your watch steady while working
• Precision screwdriver – Ideally between 1.2mm to 1.6mm (1.4mm is perfect)

These tools help ensure you don’t scratch your watch or damage the screws.

Step 1: Determine How Many Links to Remove or Add

• Try on your watch and estimate how many links need to be removed or added. If you get it wrong, you can repeat the process.
• If removing more than 2 links, remove them evenly from both sides for balance.
  Example: Removing 3 links? Take 2 from one side and 1 from the other.

Most common adjustments involve removing just 1 or 2 links.

Step 2: Secure Your Watch and Locate the Screws

• Place your watch face-down in the watch holder.
• Make sure the screw-side of the bracelet is facing up.
• Locate the tiny screws holding the links together.

Step 3: Remove the Link Pins

• Use your precision screwdriver to unscrew the pin on the link you want to remove.
• The screw will begin rising out as you turn it counterclockwise.
• Once loose, gently pull the pin out—the bracelet will separate at that link.

Step 4: Add or Remove Links

• Add or subtract links as needed.
• If adding a link, align it so the holes line up perfectly with the bracelet ends.
• Make sure the channel for the pin is clear and aligned.

Step 5: Reinsert and Tighten the Pin

• Insert the pin back through the aligned holes.
• Screw it back in clockwise using gentle, firm pressure.
• Make sure the pin is secure but not over-tightened.

Final Check

• Try on the resized bracelet.
• Make sure the fit is comfortable and the bracelet is symmetrical.
• If it still feels off, repeat the process to adjust the link count.

Can You Resize a Rolex Bracelet at Home?

Yes, you can resize your Rolex Oyster bracelet at home using the right tools and care. While some may prefer taking it to a professional, many enthusiasts resize their bracelets themselves. If you’re cautious and follow the above steps, it’s a safe and efficient process.

Tip: Avoid Common Mistakes

• If a pin feels stuck, check the alignment and don't force it.
• Don’t lose the screws or pins, because they’re tiny and tedious to replace.
• Always work on a soft, non-slip surface.

If you found this tutorial helpful and want assistance choosing or servicing a Rolex, feel free to contact us directly at watchesoff5th.com or give us a call. We’d be happy to help you jump the AD line and get into your dream timepiece.